Short answer: White Fine Powder Phytosterol Powder/CWD is a spray dried powder used in instant beverage and seasoning. It is bought to a written specification, released against a retained reference, and packed in 25 kg carton with food grade liner. Price matters, but the cost of a failed trial matters more, which is why a sample with its certificate is the sensible first step.
White Fine Powder Phytosterol Powder/CWD falls into the spray dried powder category. In commercial terms it is defined by three things: the specification range it is released against, the packing it ships in, and the documentation that accompanies it. Two suppliers can quote the same product name and still deliver materials that behave differently, because the release ranges behind the name are not the same.
That is why a technical data sheet and a certificate of analysis are read together. The data sheet describes what the supplier intends to make; the certificate describes what was actually made. When the two disagree, the certificate is the one that matters for your batch record.
The parameters below are the ones that usually decide whether a trial succeeds. Values are typical release ranges; the certificate for a specific lot will quote measured results rather than the range.
| Parameter | Typical value | Method |
|---|---|---|
| Product | White Fine Powder Phytosterol Powder/CWD | — |
| Category | Pure Plant Extract | — |
| Appearance | Conforms to the retained reference | Visual |
| Solubility | Within the agreed release range | In-house / third party |
| Mesh Size | Quoted on the certificate | In-house |
| Colour Retention | Verified before release | In-house |
| Suggested dosage | 1–5% in the dry mix | Application trial |
| Microbiology | Within food grade limits | ISO 4833 / ISO 21527 |
| Heavy metals | Below the destination market limit | ICP-MS |
| Packaging | 25 kg carton with food grade liner | — |
| Shelf life | 24 months unopened | Stability data |
White Fine Powder Phytosterol Powder/CWD is used mainly in instant beverage, seasoning and bakery. Each application stresses the material differently, so the same grade is rarely optimal everywhere.
Instant Beverage: in this system the material competes with everything else for the same sensory or functional space. A three point dosage curve — 0.7x, 1.0x and 1.3x of the suggested level — tells you more in one afternoon than three rounds of correspondence.
Seasoning: the constraint here is usually caking in humid storage. Start at the lower end of the suggested range, confirm the sensory or analytical result, and only then move up. Pushing the dosage to compensate for a weak raw material is the most common reason a formula becomes unstable later.
Bakery: in this system the material competes with everything else for the same sensory or functional space. A three point dosage curve — 0.7x, 1.0x and 1.3x of the suggested level — tells you more in one afternoon than three rounds of correspondence.
The usual starting point is 1–5% in the dry mix. Two adjustments are almost always needed: one for the process, and one for the market. A process that exposes the material to heat for longer than a few minutes will need a higher charge to deliver the same result at the end, and a market with a stricter labelling rule may cap what you can declare.
Rather than guess, ask for a sample and run the curve. A supplier who has supplied the application before can usually predict where the window sits, and that prediction is worth more than a lower price.
Release testing for this category typically covers solubility, mesh size, moisture and bulk density. Microbiology is run on a schedule, and heavy metals or pesticide residue are tested either on a schedule or against the requirement of the destination market. The tests are not unusual; what distinguishes a reliable supplier is that the results are quoted, retained and traceable.
Retained samples are held for 24 months in most operations, which is what makes an investigation possible. Without a retained sample, a complaint six months later can only be answered with an opinion.
Standard packing is 25 kg carton with food grade liner. Trial quantities of 1 kg and 5 kg are normally available, and a production run follows once the specification is agreed in writing. Lead time is typically 7 to 15 working days ex-works, and mixed containers can be consolidated across categories to reach a full load.
The documents that matter at the border are the commercial invoice, packing list, certificate of origin where applicable, and the health or non-GMO declarations some destinations require. These are issued with the shipment rather than after it, because a container held at customs costs more per day than the material is worth per kilogram.
The same material can be a food ingredient in one market and a regulated substance in another, so the destination decides the paperwork. In the European Union the relevant framework is the food additive and flavour regulation set, with labelling driven by the allergen list. In the United States the equivalent conversation is about GRAS status and FDA labelling. In much of Asia the requirement is a health or food safety declaration issued at the border.
None of this changes what the material is. It changes what has to be written on the label and which certificate has to travel with the pallet, and it is worth settling before the artwork is printed.
Four variables move the price of White Fine Powder Phytosterol Powder/CWD more than anything else: the specification range, the quantity of the run, the packing, and the documentation. A tighter assay is not a marketing claim, it is a yield loss at the plant, and it is priced accordingly. A 1 kg trial and a 25 kg drum are not the same product commercially even when the certificate is identical.
Beware of quotes that are much lower than the market: in this category they usually mean a wider specification, a substitute raw material, or a certificate written for a different lot. The cheapest way to find out is to buy a sample, test it against the specification, and compare the result with the certificate that came with it.
The recurring issue in this category is caking in humid storage and loss of aroma during drying. It rarely appears in a sample and almost always appears in production, which is why trials should be run in the real matrix rather than in water.
What is the minimum order quantity for White Fine Powder Phytosterol Powder/CWD? Typically 1 kg for a trial and 25 kg for a production order, though the packing can be adjusted for a first run.
Can you send a sample with its certificate? Yes. Samples of 100 g to 500 g are dispatched with the lot certificate, usually within three working days.
Is the specification negotiable? Within the production window, yes. A narrower assay, a different mesh or a declared allergen position can usually be accommodated, and the answer comes with a sample rather than a promise.
Which documents are supplied? COA for the lot, MSDS, allergen statement, non-GMO statement and packing list.
How is the material packed for export? 25 kg carton with food grade liner, with an inner food grade liner. Custom packing is possible from 100 kg.
How long does delivery take? 7 to 15 working days ex-works for a standard grade, longer where a custom specification or private label artwork is involved.
If you are specifying White Fine Powder Phytosterol Powder/CWD for a new formulation, the fastest route to a decision is a sample with its certificate and a short conversation about the process it has to survive. Send the target values and the application, and the answer will come back with a specification and a lot number rather than a brochure.
